日日躁狠狠躁夜夜躁a片图片,av日韩手机在线,亚洲 中文字幕在线观看,亚洲精品在线观看熟女人妻

　　不銹鋼風管通風管道常見故障檢修透風嚴重，能源消耗。關鍵危害：整個系統風量損害過大，沒法做到風量要求，并導致能源嚴重消耗。很有可能的緣故：咬口縫和法蘭插條接縫處及孔眼縫隙處未用密封膏封嚴;管片開料咬口留量超過規范要求等。山東通風管道常見故障檢修磚構造風道與金屬風管連接處未設埋件或密封縫隙過大或連接處不嚴密。

Common malfunctions of stainless steel air ducts and ventilation ducts require severe ventilation and energy consumption. Key hazard: The air volume of the entire system is damaged too much, unable to meet the air volume requirements, and leading to serious energy consumption. It is highly likely that the sealing paste was not used to seal the bite joint, flange insertion joint, and hole gap; The biting allowance of the pipe segment exceeds the standard requirements. Common troubleshooting of ventilation ducts in Shandong: The connection between the brick structure air duct and the metal air duct is not equipped with embedded parts, or the sealing gap is too large or the connection is not tight.

　　應對措施：高壓風管山東通風管道可選用按鈕式咬口;髙壓風管或清潔系統風管四角處運用拐角咬口縫或協同角咬口。不銹鋼風管咬口縫、無法蘭插條接縫處及孔眼縫隙處，都須用密封膏封嚴，不可透風。施工中按要求在磚、構造風道與金屬風道連接處設定埋件，或要求土建企業配合開展堵封， 山東通風管道連接嚴密。

Response measures: High pressure air duct Shandong ventilation duct can choose button type bite; Use corner bite seams or synergistic corner bite seams at the corners of high-pressure air ducts or cleaning system air ducts. Stainless steel air ducts must be sealed tightly with sealing paste at the biting seam, non flange insertion strip seam, and hole gap, and must not be ventilated. During construction, embedded parts should be installed at the connection between bricks, structural air ducts, and metal air ducts as required, or civil engineering companies should cooperate to carry out sealing. The ventilation pipes in Shandong should be tightly connected.

　　金屬極氣體保護焊

Metal electrode gas shielded welding

　　它屬于氣體保護焊，也是一種電弧焊，是在維護氣體下，焊絲被電弧溶化。金屬極氣體保護焊可用以鋼、非碳素鋼、低合金鋼及其高合金等這種材料，應用很普遍。但有一點，通風管道它的維護氣體務必為活性氣體，例如二氧化碳或是混和氣體等。的缺陷是假如在戶外開展焊接，那麼工件不能受潮，不然會危害維護氣體的維護效果。

It belongs to gas shielded welding and is also a type of arc welding, where the welding wire is melted by the arc under maintenance gas. Metal electrode gas shielded welding can be used for materials such as steel, non carbon steel, low alloy steel, and their high alloys, and is widely used. But one thing is that the maintenance gas for ventilation ducts must be active gases, such as carbon dioxide or mixed gases. The flaw is that if welding is carried out outdoors, the workpiece cannot be damp, otherwise it will endanger the maintenance effect of the gas.

　　鎢極惰性氣體保護焊

Tungsten inert gas shielded welding

　　電弧是在鎢電焊絲和工件中間造成，不銹鋼風管通風管道常見故障檢修焊接要求維護氣體為純氬氣，且焊條不是帶電的，所以既能夠手動送入，也可以設備送入，有時也可以不送入。

The arc is caused between the tungsten welding wire and the workpiece. Common faults in stainless steel air ducts and ventilation ducts require maintenance gas to be pure argon, and the welding rod is not charged. Therefore, it can be manually fed, equipment fed, or sometimes not fed.

　　導熱系數小

Low thermal conductivity

　　保溫材料導熱系數均在，風管槽型法蘭、卡條選用塑鋼型材，鋁合金、塑鋼復合的型材，其風道無熱橋，無結露。

The thermal conductivity of insulation materials is all within the range of. The groove type flange and clamp of the air duct are made of plastic steel profiles, and the aluminum alloy and plastic steel composite profiles are used. The air duct has no thermal bridge and no condensation.

　　本文由 山東通風管道 為您精心提供，如想了解更多請點擊我們的網站：http://www.fsjt-gov.com，我們將會以最大的熱情為您解答!

This article is carefully provided by Shandong Ventilation Pipeline for you. If you want to learn more, please click on our website: http://www.fsjt-gov.com We will answer you with the greatest enthusiasm!